5523
Global
Height rank

The Pinnacle@Duxton Block 1D

Singapore
Height
1
To Tip:
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the highest point of the building, irrespective of material or function of the highest element (i.e., including antennae, flagpoles, signage and other functional-technical equipment).
159.7 m / 524 ft
2
Architectural:
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the architectural top of the building, including spires, but not including antennae, signage, flag poles or other functional-technical equipment. This measurement is the most widely utilized and is employed to define the Council on Tall Buildings and Urban Habitat (CTBUH) rankings of the "World's Tallest Buildings."
159.7 m / 524 ft
3
Occupied:
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the highest occupied floor within the building.
152.1 m / 499 ft
  Floors
Above Ground
The number of floors above ground should include the ground floor level and be the number of main floors above ground, including any significant mezzanine floors and major mechanical plant floors. Mechanical mezzanines should not be included if they have a significantly smaller floor area than the major floors below. Similarly, mechanical penthouses or plant rooms protruding above the general roof area should not be counted. Note: CTBUH floor counts may differ from published accounts, as it is common in some regions of the world for certain floor levels not to be included (e.g., the level 4, 14, 24, etc. in Hong Kong).
50
Below Ground
The number of floors below ground should include all major floors located below the ground floor level.
1
1 2 3 The Pinnacle@Duxton Block 1D
Height 159.7 m / 524 ft
Floors 50
Official Name
The current legal building name.

The Pinnacle@Duxton Block 1D

Name of Complex
A complex is a group of buildings which are designed and built as pieces of a greater development.

The Pinnacle@Duxton

Type
CTBUH collects data on two major types of tall structures: 'Buildings' and 'Telecommunications / Observation Towers.' A 'Building' is a structure where at least 50% of the height is occupied by usable floor area. A 'Telecommunications / Observation Tower' is a structure where less than 50% of the structure's height is occupied by usable floor area. Only 'Buildings' are eligible for the CTBUH 'Tallest Buildings' lists.

Building

Status
Completed
Architecturally Topped Out
Structurally Topped Out
Under Construction
Proposed
On Hold
Never Completed
Vision
Competition Entry
Canceled
Proposed Renovation
Under Renovation
Renovated
Under Demolition
Demolished

Completed

Completion

2009

Country
The CTBUH follows the United Nations's definition of Country, and thus uses the lists and codes established by that organization.

Singapore

City
The CTBUH follows the United Nations's definition of City, and thus uses the lists and codes established by that organization.

Singapore

Function
A single-function tall building is defined as one where 85% or more of its usable floor area is dedicated to a single usage. Thus a building with 90% office floor area would be said to be an "office" building, irrespective of other minor functions it may also contain.

A mixed-use tall building contains two or more functions (or uses), where each of the functions occupy a significant proportion of the tower's total space. Support areas such as car parks and mechanical plant space do not constitute mixed-use functions. Functions are denoted on CTBUH "Tallest Building" lists in descending order, e.g., "hotel/office" indicates hotel function above office function.

Residential

Structural Material
All-Steel
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from steel. Note that a building of steel construction with a floor system of concrete planks or concrete slab on top of steel beams is still considered an “all-steel” structure as the concrete elements are not acting as the primary structure.

All-Concrete
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from concrete which has been cast in place and utilizes steel reinforcement bars and/or steel reinforced concrete which has been precast as individual components and assembled together on-site.

All-Timber
Both the main vertical/lateral structural elements and the floor spanning systems are constructed from timber. An all-timber structure may include the use of localized non-timber connections between timber elements. Note that a building of timber construction with a floor system of concrete planks or concrete slab on top of timber beams is still considered an “all-timber” structure as the concrete elements are not acting as the primary structure.

Mixed-Structure
Utilizes distinct systems (e.g. all-steel, all-concrete, all-timber), one on top of the other. For example, a Steel Over Concrete indicates an all-steel structural system located on top of an all-concrete structural system, with the opposite true of Concrete Over Steel.

Composite
A combination of materials (e.g. steel, concrete, timber) are used together in the main structural elements. Examples include buildings which utilize: steel columns with a floor system of reinforced concrete beams; a steel frame system with a concrete core; concrete-encased steel columns; concrete-filled steel tubes; etc. Where known, the CTBUH database breaks out the materials used within a composite building’s primary structural elements.

All-Concrete

Height
Architectural
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the architectural top of the building, including spires, but not including antennae, signage, flag poles or other functional-technical equipment. This measurement is the most widely utilized and is employed to define the Council on Tall Buildings and Urban Habitat (CTBUH) rankings of the "World's Tallest Buildings."

159.7 m / 524 ft

To Tip
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the highest point of the building, irrespective of material or function of the highest element (i.e., including antennae, flagpoles, signage and other functional-technical equipment).
159.7 m / 524 ft
Occupied
Height is measured from the level of the lowest, significant, open-air, pedestrian entrance to the highest occupied floor within the building.
152.1 m / 499 ft
Floors Above Ground
The number of floors above ground should include the ground floor level and be the number of main floors above ground, including any significant mezzanine floors and major mechanical plant floors. Mechanical mezzanines should not be included if they have a significantly smaller floor area than the major floors below. Similarly, mechanical penthouses or plant rooms protruding above the general roof area should not be counted. Note: CTBUH floor counts may differ from published accounts, as it is common in some regions of the world for certain floor levels not to be included (e.g., the level 4, 14, 24, etc. in Hong Kong).

50

Floors Below Ground
The number of floors below ground should include all major floors located below the ground floor level.

1

# of Elevators
Number of Elevators refers to the total number of elevator cars (not shafts) contained within a particular building (including public, private and freight elevators).

5

Rankings

#
5523
Tallest in the World
#
74
Tallest in Singapore
#
74
Tallest in Singapore

Construction Schedule

2002

Proposed

2003

Construction Start

2009

Completed

Owner/Developer
Architect
Design

Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.

Architect of Record

Usually takes on the balance of the architectural effort not executed by the "Design Architect," typically responsible for the construction documents, conforming to local codes, etc. May often be referred to as "Executive," "Associate," or "Local" Architect, however, for consistency CTBUH uses the term "Architect of Record" exclusively.

Owner/Developer
Architect
Design

Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.

Architect of Record

Usually takes on the balance of the architectural effort not executed by the "Design Architect," typically responsible for the construction documents, conforming to local codes, etc. May often be referred to as "Executive," "Associate," or "Local" Architect, however, for consistency CTBUH uses the term "Architect of Record" exclusively.

Structural Engineer
Design

The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.

Surbana International Consultants
MEP Engineer
Design

The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.

SIPM Consultants PTE Ltd
Contractor
Main Contractor

The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.

Chip Eng Seng PTE Ltd
Other Consultant

Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).

Stormwater Management
Fast Flow Systems Pte Ltd

CTBUH Initiatives

Singapore Visit

12 August 2009 - Event

 

Videos

21 October 2010 | Singapore

Best Tall Building Asia & Australasia: Pinnacle @ Duxton: Superdensity – Reimagining high-rise housing

Pinnacle @ Duxton has integrated public outdoor green spaces at height with the creation of two usable linear skyparks as well as a large park...

Research

08 August 2017

A Tale of Two Singapore Sky Gardens

Swinal Samant & Na Hsi-En, National University of Singapore

This paper examines the effectiveness of the design strategies used in two HDB developments for encouraging active usage and social interaction. The study was conducted...

About The Pinnacle@Duxton Block 1D

The Pinnacle @ Duxton defines super-density housing with 1,848 apartment units built on a plot of only 2.5 hectares (6 acres)—only slightly larger than two football fields. Public housing as an architectural typology is inherently complex. It marries housing—the most private of programs—with public space. The public housing project addresses pragmatic, financial, social and even political issues. Add to that an irregular west facing site in the heart of Singapore’s congested central business district, trees to be conserved and required connections to the neighboring park and community center, and the brief is incredibly complex.

The Pinnacle @ Duxton resolves these issues in an elegant manner and in the process creates a totally new aesthetic for public housing and typology for tall buildings. It boldly demonstrates a sustainable urban high-rise, high-density living and initiates an innovative typology of public communal spaces that are metaphorically reclaimed from the air. Seven tower blocks are placed in the most open and porous way, creating urban windows that frame the city skyline. With this maneuver, the layout eliminates overlooking between units; optimizes views, connection, air and light flow; minimizes western exposure to reduce solar heat gain; and includes the conservation of historical trees. A large forecourt for the towers was created, maintaining visual connectivity with the existing Tanjong Pagar Community Club, which is a major community node for this neighborhood.

Within the development, residents enjoy the convenience of shops, a food court, an education center, a childcare center, and two residents’ committee centers. Beyond the development, residents are served by two train stations which link them to the island-wide mass rapid transit system and bus stops at the development’s doorstep with a bus interchange depot. Exploiting the inherent sustainability of the high-density, high-rise housing model, The Pinnacle @ Duxton creates a walkable and diverse community, and provides a connected, convenient and compact model of sustainable urbanism.

On the ground, a new architectural surface warps, peels and flows over the carpark and services, efficiently organizing vehicular and pedestrian circulation. The linear block layout allows for a direct services network in the car park; a double-volume carriageway running under the blocks accommodates the fire engines and waste disposal. The peripheral arrangement of service cores allows for the car park to be efficiently and clearly laid out. The new architectural surface is a lush environmental deck that connects strategically with the existing urban network while forming a green lung for the city. Landscape elements comprising pavilion, benches, and exercise nodes are plug-ins to this extended park network and function as location markers as well as vibrant community nodes.

Layers of tree screens border the site and pathways to provide varying degrees of opacity and privacy, softening the massiveness of the towers to create a human scale. Integrated within this landscape is an outdoor gallery, “Traces,” which captures the historical significance of this site by tracing the outlines of the original two public housing blocks which were built in the 60s.

Continuous Sky Gardens on the 26th and 50th floors weave through the seven tower blocks, forming a simple yet powerful sculptural skyline that creates a strong identity for the project. Twelve Sky Gardens are conceptualized as displaced landscapes like a Sky Gym, Hillock, Crater, Meadows, Lounge, and Beach. They function as an extension of the living environment for residents, forming almost 1 hectare (2.5 acres) of new land. Designed with children playgrounds, an outdoor fitness gym for the elderly, landscape furniture resembling beach deck chairs and outdoor sofa sets; they provide diverse, creative and unusual spaces for community interaction. They also function as areas of refuge in case of emergencies and allow the sustainable sharing of mechanical services, reducing seven sets to just three. The seamless connection created by the linking sky bridges allow for the entire development to be serviced by a single Building Maintenance Unit.

The individual apartment unit is designed with growth of the occupants in mind—from newly-weds to homes with kids, then teenagers and later grandchildren. The pre-cast flat slab system and structural column zoning allowed the flexibility of wall placement in lightweight concrete, which extends 400mm (15.7in) on either side of the grid—thus rooms can contract or expand to suit the occupants.

Efficiently constructed off-site, the pre-fabricated concrete building components were delivered and put together on-site. Residents were given an unprecedented choice of exterior façade treatments—planter boxes, bays, bay windows, windows, and balconies. The façade is atomized into modular panels strung together to form seven sets. Composed by simple rules, the layered sets form a complex façade. The pre-fabricated panels incorporate both structure and services—including columns, beams and service ducts. With a simple and affordable application of paint finish, a highly differentiated façade is created from an undifferentiated fabrication process—creating visual interest and reducing the perceived building mass.

21 October 2010 | Singapore

Best Tall Building Asia & Australasia: Pinnacle @ Duxton: Superdensity – Reimagining high-rise housing

Pinnacle @ Duxton has integrated public outdoor green spaces at height with the creation of two usable linear skyparks as well as a large park...

21 October 2010 | Singapore

CTBUH 9th Annual Awards Dinner

The 9th Annual Awards Ceremony & Dinner was held in Mies van der Rohe’s iconic Crown Hall, on the Illinois Institute of Technology campus, Chicago....

08 August 2017

A Tale of Two Singapore Sky Gardens

Swinal Samant & Na Hsi-En, National University of Singapore

This paper examines the effectiveness of the design strategies used in two HDB developments for encouraging active usage and social interaction. The study was conducted...

17 October 2016

21st Century Vertical Lifestyles - Intergenerational, Integrated Communities

Stephan Reinke, Stephan Reinke Architects Limited

How does the 21st Century youth culture of social media integrate and merge with an ever increasing tech savvy senior population? As our cities and...

17 October 2016

Replacing Corridors with Sky-Courts to Create Affordable and Socially Desirable High-Rise Housing

Mazlin Ghazali, Arkitek M Ghazali; Tareef Hayat Khan, Universiti Teknologi Malaysia

Studies over the last 60 years have consistently concluded that high-rise housing is less suitable for most people compared to low-rise, especially for children. To...

04 February 2016

The Other Side of Tall Buildings: The Urban Habitat

Daniel Safarik, CTBUH

A growing number of tall buildings recognized by the CTBUH, through its international awards programs and research, are noteworthy not so much because of their...