You must be a CTBUH Member to view this resource.
Bella Sky Tower 2
Bella Center Hotel Tower 2
Building
Completed
2011
Center Boulevard
Hotel
All-Concrete
76.5 m / 251 ft
24
1
5
Proposed
Construction Start
Completed
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
You must be a CTBUH Member to view this resource.
Usually involved in the front end design, with a "typical" condition being that of a leadership role through either Schematic Design or Design Development, and then a monitoring role through the CD and CA phases.
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The Design Engineer is usually involved in the front end design, typically taking the leadership role in the Schematic Design and Design Development, and then a monitoring role through the CD and CA phases.
The main contractor is the supervisory contractor of all construction work on a project, management of sub-contractors and vendors, etc. May be referred to as "Construction Manager," however, for consistency CTBUH uses the term "Main Contractor" exclusively.
Other Consultant refers to other organizations which provided significant consultation services for a building project (e.g. wind consultants, environmental consultants, fire and life safety consultants, etc).
30 October 2017
Kim H. Nielsen, 3XN Architects
The under-design Quay Quarter Tower will create a stunning new building on the Sydney skyline that sets new benchmarks in office tower design globally and...
Bella Sky Towers lean 15 degrees to each side. In addition, the top 10 stories shift horizontally, and the bottom 14 stories have a further horizontal displacement. They rise from a common base and are connected at the top floor by a skybridge. Their angled design allows for nearly all 814 hotel rooms to have views over the neighboring nature preserve, city center and the adjacent new urban area anchored by Copenhagen’s major Convention Center.
Specially developed software was utilized to create digital 3D models of all elements of the building to make sure the structures could withstand the enormous pressure from the leaning towers. The façade also resulted in a number of construction challenges, requiring a team of specialized “rappellers” to assemble the puzzle of pre-fabricated aluminum elements. Comprised of less than 50% glass, the façade still allows for floor-to-ceiling windows in each room while providing natural shading and insulation. The façade patterning, which is formed by diagonal and vertical lines, enhances the building’s aesthetics by reflecting the turning of the towers.
Subscribe below to receive periodic updates from CTBUH on the latest Tall Building and Urban news and CTBUH initiatives, including our monthly newsletter. Fields with a red asterisk (*) next to them are required.
View our privacy policy